@ToolkitRC 2023
charging after replacing the battery. Ensure the next
connected battery requires the same settings as the
previous battery that was being charged
Work completed: whether to stop or trickle charge after
the charge is over.
Battery selection: whether to skip the battery selection
interface when selecting charging.
Backlight: the backlight brightness level of the display
can be set from 1 to 10 level.
Buzzer: the tone of the buzzer, which can be set to off.
Language: system display language. You can choose
English, Chinese, etc.
Theme style: two styles of Light and Dark can be
selected.
Default: restore all settings to factory values.
ID: the unique ID of the device factory settings.
To Next Page
Loading...
