@ToolkitRC 2023
Other functions
1. Firmware upgrade
After connecting the Q6AC to the computer with the
USB data cable in the box, the computer will recognize a
USB drive named Toolkit. Download the upgrade file
app.upga on the official website. To update copy and
past the new file and overwrite the files in the USB to
upgrade the firmware.
2. Automatically continue charging
When a battery is fully charged, after unplugging the
battery, connect to the next battery, the device will
automatically continue to charge, you can start and stop
this function in the settings menu.
3. Fan stepless speed regulation
When the internal temperature of the device exceeds
43°C or AC power supply, the power is greater than
100W, and the fan will increase the fan speed linearly
according to the internal temperature increase or power
increase. Make it less noisy when operating at low
temperatures or low power.
4, Wireless charging
Q6AC has built-in 15W wireless charging, only need to
place the device that supports wireless charging at the
top of the product wireless charging position, and will
automatically start charging.
5, USB fast charging
Q6AC built-in USB fast charging protocol, up to C port
up to 65W charging power, A port can support up to
30W. Supported protocols are PD, QC, AFC, FCP, SCP, PE,
SFCP, VOC.
To Next Page
Loading...
