@ToolkitRC 2023
Safety
1. Q6AC allows an input voltage of AC 100V-240V or
DC 7-30V. To ensure that the power supply voltage
is consistent, pay attention to the positive and
negative polarity of the power supply before use.
2. Do not use this product in hot or humid
environments. Keep away from flammable liquids
and gases.
3. Never leave charging batteries unattended.
4. When not in use, please turn off/unplug the device.
5. When using the charging function, please set a
current that matches the battery performance
envelope. Do not set an excessive current for
charging to avoid damage to the battery. Check
the guidelines of your battery’s manufacturer for
correct charging instructions.
To Next Page
Loading...
