ToolKitRC M6 User Manual

@
ToolkitRC
2019
1
M6
Manual V1.0
2019.06
www.ToolkitRC.com
ToolkitRC Technology (Shenzhen) Co.. Ltd.

ToolKitRC M6 Specifications

General

Charging Current	0.1-10A
Discharge Current Range	0.1-2A
LiPo/LiHV/LiFe/LiIon	1-6S
USB Output	5V/2.1A
Display	LCD
Battery Types Supported	LiPo, LiHV, LiFe, LiIon, NiMH, NiCd, Pb

Summary

Safety Precautions

Product Overview and Features

Getting Started: Quick Start Guide

Charging and Discharging Operations

Battery Type Selection and Setup

Configure the charger for different battery types like LiPo, NiMH, etc.

Cutoff Voltage (TVC) Configuration

Set the terminal voltage control for automatic charge termination.

NiMH Peak Voltage (PeakV) Setting

Adjust the negative voltage drop for NiMH batteries when fully charged.

Battery Cell Count Configuration

Manually set or auto-detect the number of cells in a battery.

Charge and Discharge Current Settings

Define charge/discharge current limits and select operational modes.

Working Mode Selection (Charge, DisCHG, StoCHG)

Signal Measurement and Analysis

Battery Health Monitoring

Voltage and Cell Balancing

Signal Output Generation

Power Output Capabilities

Specialized Drone Charging

System Settings and Preferences

Manual Voltage Calibration