@ToolkitRC 2023
=================================================
Tips:
6. Please set the charging rate of 1-2C according to
the battery capacity. For example, if the battery capacity
is 2000mAh, please set the charging current to 2.0-4.0A.
Check the guidelines of your battery’s
manufacturer for correct charging instructions.
==================================================
6，NiMh setting (PeakV)
When the battery type is NiMh, the negative
pressure value when the battery is fully charged can be
set, and the setting range is 3mV-15mV, as shown below:
To Next Page
Loading...
