@ ToolkitRC 2021
from the discharging battery to the input battery, the
maximum support is 15.0A@250W discharge.
5，Input MaxVoltage
When the discharge mode is selected to recycle, the
battery setting interface will increase the input MaxVol
setting. As shown below.
Move the cursor to [Discharge Mode] and press [OK]
to adjust the input MaxVol. If the input voltage reaches
this voltage during discharge, the discharge will stop.
=================================
Tips：
Please set the input cut-off voltage withing the
safe voltage range of the power supply battery. After the
voltage is reached, the charger will automatically stop
recycling and discharging. Setting a high over-voltage
may damage the input power battery.
=================================
To Next Page
Loading...
