@ ToolkitRC 2021
6，End voltage（TVC）
Move the cursor to [End Voltage] and press [OK] to
modify the end voltage of the single battery. When the
working mode is charging, it is the charging cut-off
voltage, and the range is plus or minus 50mV of the full
voltage. When the working mode is discharge, it is the
discharge cut-off voltage. Scroll the [Scroll Wheel] to
adjust the value in steps of 0.01V.
=================================
1，Only LiPo, LiHV, LiFe batteries can set the end
voltage.
2 ， If not familiar with battery characteristics,
please do not modify the cut-off voltage.
3，The charging cut-off voltage can be set to a
range of plus or minus 50mV of full voltage.
4, Glossary explanation:
TVC: English abbreviation for terminal voltage control
=================================
To Next Page
Loading...
