ToolKitRC M6DAC - 8，Nimh Setting (Peakv); 9，Cycle Setting

@ ToolkitRC 2021
20
the chapter of <System Settings> in this manual
=================================
8，NiMH setting (PeakV)
When the battery type is NiMh, can set the negative
pressure value when the battery is fully charged, the
range is 5mV-15mV, as shown below.
=================================
Tips：
1，Only NiMh battery can set negative battery
voltage.
2，Glossary explanation:
PeakV: When the nickel-metal hydride battery is
fully charged, the voltage drop of each piece peaks.
=================================
9，Cycle setting
When the battery type is NiMh, and the work