@ ToolkitRC 2021
Power Selection:
The user can select P1, P2, P3. These
are 3 user defined banks of presets for the power
input settings to allow quickly changing between
power source profiles.
Power type: Battery and adapter (PSU). A battery can be
used to recover energy when discharging batteries
(Recycle mode). This mode also provides greater current
draw than internal resistance discharging. Recycle mode
can not be used with a Power Supply Unit (PSU) or any
form of mains power adapter
Max power: the maximum power absorbed from the
input port when charging.
Max current: the maximum current drawn from the input
port during charging.
Voltage range: the allowable input voltage range.
Charging security Set.: Short press to expand settings.
As shown below.
To Next Page
Loading...
