Topcom BUTLER 930 - Making Calls

12 Butler 930
Butler 930
7.3 Making Calls
7.3.1 External Call
• Press the off hook key .
• The call symbol appear on the display.
• You will hear the dial tone. Dial the telephone number you wish to call.
• The number appears on the display and is dialed.
• After finishing your call, press the on hook key to hang up.
7.3.2 Number preparation
• Dial the telephone number you wish to call. You can correct the number by pressing the
‘Erase’ key.
• Press the off hook key .
• The call symbol appear on the display.
• The telephone number is dialed automatically.
• After finishing your call, press the on hook key or put the handset back on the
base unit to hang up.
7.3.3 Redialing the last number dialed
• Press the redial key .
• Press the off hook key . The number you last called is dialed automatically.
7.3.4 Redial one of the last 10 numbers dialed
• Press the redial key . The number you last called appears on the display.
• Press the up or down key
/ repeatedly until the desired number appears on
the display.
• Press the off hook key .
• The number shown on the display is dialed automatically.
• After finishing your call, press the on hook key or put the handset back on the
base unit to hang up.
7.3.5 Calling a programmed number from the phonebook
The telephone has a phonebook in which you can store telephone number with name (See
also § “10 The phonebook”). To call a number from the phonebook:
• Press the phonebook key . The first number of the phonebook appears on the
display.
• Press the up or down key
/ repeatedly to select the telephone number you
want to call.
• Press the off hook key .
• The number shown on the display, is dialed automatically.
• After finishing your call, press the on hook key or put the handset back on the
base unit to hang up.
7.3.6 Flash signal
With the ‘Flash’ key you can use certain services on your external line such as “call
waiting” (if your telephone company offers this feature); or to transfer calls if you use a
telephone exchange (PABX). The flash key is a brief interruption of the line. You can use the
flash key during a call by pressing the left menu key ‘Flash’ . You can set the flash time
to short or long (see “12.1 Flash time setting”).
12
6
12
6
4
12
4
15
7
12
6
7
15
7
12
6
13
13