Topcom BUTLER 930 - Clock and Alarm Settings; Setting the Date and Time; Using the Alarm Feature

18 Butler 930
Butler 930
9 Setting the clock and alarm
9.1 Date and time format
• Press the left ‘Menu’ key.
• Press the up or down key
/ repeatedly until ‘HS Settings’ is selected.
•Press ‘Select’ to confirm.
• Press the up or down key
/ repeatedly until ‘Date & Time’ is selected.
•Press ‘Select’ to confirm.
• Press the up or down key
/ repeatedly and select ‘Date Format’ or ‘Time
Format’.
•Press ‘Select’ to confirm.
• Use the up or down key
/ to select the date format ‘DD-MM’ / ‘MM-DD’ or
time format ‘12-Hour’ / ‘24-Hour’.
•Press ‘Save’ to confirm your selection or press ‘Back’ to leave the menu without
saving.
9.2 Setting the date and time
• Press the left ‘Menu’ key.
• Press the up or down key
/ repeatedly until ‘HS Settings’ is selected.
•Press ‘Select’ to confirm.
• Press the up or down key
/ repeatedly until ‘Date & Time’ is selected.
•Press ‘Select’ to confirm.
• Press the up or down key
/ repeatedly and select ‘Set Date’ or ‘Set Time’.
•Press ‘Select’ to confirm.
• Enter the current date/time by the numeric keypad.
•Press ‘Save’ to confirm your selection or press ‘Back’ to leave the menu without
saving.
9.3 Using the alarm feature
Set the date and time and use your handset to give you a reminder alarm. You can have
different alarm settings for each handset registered to your base. The alarm rings only at the
handset, not at the base or any other handset.
If one of the alarms is set, the alarm set icon appears in standby mode on the display.
When the alarm sounds, press any key to turn it off.
9.3.1 Set the alarm
• Press the left ‘Menu’ key.
• Press the up or down key
/ repeatedly until ‘HS Settings’ is selected.
•Press ‘Select’ to confirm.
• Press the up or down key
/ repeatedly until ‘Alarm’ is selected.
•Press ‘Select’ to confirm.
• Press the up or down key
/ repeatedly and select ‘On’ or ‘Off’.
•Press ‘Select’ to confirm.
If you have Caller id on your telephone line and the operator sends date
and time, your clock will be set automatically on an incoming call.
15
7
15
7
15
7
15
7
13
5
13
15
7
15
7
15
7
13
5
15
7
15
7
15
7