Topcom BUTLER 930 - Handset Reset Procedure

Butler 930 17
Butler 930
ENGLISH
•Press ‘Select’ to confirm.
• Press the up or down key
/ repeatedly until ‘Auto Answer’ is selected.
•Press ‘Select’ to confirm.
•Select
–‘On’: turn on the auto answer
–‘Off’: turn off the auto answer
•Press ‘Save’ to confirm your selection or press ‘Back’ to leave the menu without
saving.
7.22 Turning visual ringer and shaker on/off
By turning on the visual ringer and shaker, the visual ring will blink and the handset will
vibrate during an incoming call.
• Press and hold the key until the icon appears to activate it.
• Press and hold the key until the icon disappears to deactivate it.
8 Handset reset
You can restore all handset settings back to default and erase all phonebook, call log, ring
volume/melodies, Audio setup, Tone setup, Alarm, language and redial entries. The LCD
contrast cannot be restored.
To restore the default settings:
• Press the left ‘Menu’ key.
• Press the up or down key
/ repeatedly until ‘HS Settings’ is selected.
•Press ‘Select’ to confirm.
• Press the up or down key
/ repeatedly until ‘HS Reset’ is selected.
•Press ‘Select’ to confirm.
• Enter the pin code (0000).
•Press ‘Reset’ to confirm your selection or press ‘Back’ to leave the menu without
saving.
The default settings are:
Alarm: Off
Audio Setup: 3
INT/EXT Melody: Melody 3
INT/EXT Ring Volume: Volume 3
Key Tone: On
Range Alarm: On
Handset name: HS1
Time Format: 24 hours
Date Format: DD-MM
Phone Book: Empty
Call log: Empty
Redial list: Empty
Auto Answer: Off
Time and Date: 0:00 01-01
After a reset you have to turn on the handset again, see “7.1 Turning
the handset on/off”.
15
7
13
5
1
9
9
15
7
15
7
13
5