16 Butler 930
Butler 930
•Press ‘Save’ to confirm your selection or press ‘Back’ to leave the menu without
saving.
7.18 Range alarm
A beep will sound when the handset is out of the base range. You can turn this audible
warning on/off:
• Press the left ‘Menu’ key.
• Press the up or down key
/ repeatedly until ‘HS Settings’ is selected.
•Press ‘Select’ to confirm.
• Press the up or down key
/ repeatedly until ‘Tone Setup’ is selected.
•Press ‘Select’ to confirm.
• Press the up or down key
/ repeatedly until ‘Range Alarm’ is selected.
•Select
–‘On’: turn on the range alarm
–‘Off’: turn off the range alarm
•Press ‘Save’ to confirm your selection or press ‘Back’ to leave the menu without
saving.
7.19 Display contrast
To change the display contrast:
• Press the left ‘Menu’ key.
• Press the up or down key
/ repeatedly until ‘HS Settings’ is selected.
•Press ‘Select’ to confirm.
• Press the up or down key
/ repeatedly until ‘LCD Contrast’ is selected.
•Press ‘Select’ to confirm.
• Press the up or down key
/ repeatedly to change the contrast between 0
(light) and 16 (dark).
•Press ‘Save’ to confirm your selection or press ‘Back’ to leave the menu without
saving.
7.20 Changing the handset name
You can change the handset name displayed on the handset during standby.
• Press the left ‘Menu’ key.
• Press the up or down key
/ repeatedly until ‘HS Settings’ is selected.
•Press ‘Select’ to confirm.
• Press the up or down key
/ repeatedly until ‘HS Name’ is selected.
•Press ‘Select’ to confirm.
• Enter the new handset name and press ‘Erase’ to erase the characters in front of the
cursor.
•Press ‘Save’ to confirm your selection or press ‘Back’ to leave the menu without
saving.
7.21 Auto answer
When there is an incoming call and the handset is on the base, the phone automatically takes
the line when lifted. This function can be turned on or off.
• Press the left ‘Menu’ key.
• Press the up or down key
/ repeatedly until ‘HS Settings’ is selected.
To Next Page
Loading...
