EasyManua.ls Logo

Topcom BUTLER 930 - Locking the Keypad

Topcom BUTLER 930
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Butler 930 15
Butler 930
ENGLISH
Press the up or down key / repeatedly until ‘Ring Setup’ is selected.
•PressSelect’ to confirm.
•SelectINT Ring’ or ‘EXT Ring’ and press ‘Select’.
•SelectMelody’ or ‘Volume’ and press ‘Select’.
The current volume and melody is shown and hearable.
Press the up or down key
/ repeatedly to select the desired volume/melody.
•PressSave to confirm your selection or press ‘Back to leave the menu without
saving.
7.15 Setting the earpiece/handsfree volume
You can also use the menu to adjust the audio volume of the handsfree speaker and
earpiece:
Press the ‘Menu’ key.
Press the up or down key
/ repeatedly until ‘HS Settings’ is selected.
•PressSelect’ to confirm.
Press the up or down key
/ repeatedly until ‘Audio Setup’ is selected.
•PressSelect’ to confirm.
•SelectSpeaker V.’ or ‘Earpiece V.’ and press ‘Select
.
Press the up or down key / repeatedly to select the desired volume.
•PressSave to confirm your selection or press ‘Back to leave the menu without
saving.
7.16 Locking the key pad
You can lock the keypad to prevent involuntary key presses. When the keypad is locked it is
impossible to dial a telephone number, only the direct memory keys M1 - M4 can be used.
Also incoming calls can still be answered.
To activate keypad lock:
Press and hold the keypad lock key for 5 seconds.
•‘HS Locked’ and the icon
will appear on the display.
To deactivate keypad lock:
Press the keypad lock key again for 5 seconds.
7.17 Turning key click on/off
You can set the handset to make a beep whenever you press a key.
Press the left ‘Menu’ key.
Press the up or down key
/ repeatedly until ‘HS Settings’ is selected.
•PressSelect’ to confirm.
Press the up or down key
/ repeatedly until ‘Tone Setup’ is selected.
•PressSelect’ to confirm.
Press the up or down key
/ repeatedly until ‘Key Tone’ is selected.
•Select
–‘On’: turn on key click
–‘Off’: turn off key click
You can also change the ring volume during incoming call,
see “7.4 Receiving a Call”.
15
7
15
7
13
5
15
7
15
7
13
15
7
13
5
11
11
15
7
7
15
7

Related product manuals