23
Care and check
Care and check
Daily Maintenance
• This instrument is very sensitive to dust. Protect the instrument with the dust cover when
it is not in use.
• Turn the power switch off when the instrument is not used.
Replacing the Projection Lamp
1 Turn power switch 'off'.
2 Remove the lamp cover screw and remove the cover.
Caution
To avoid electric shock, unplug the power cable when replacing
the projection lamp.
Caution
Do not replace the projection lamp immediately after turning off
the light. Otherwise, you might get burnt by the hot temperature of
the lamp.
To Next Page
Loading...
