Topcon ACP-8 - Reference; Optional Accessories; Specifications

29
Reference
Reference
Optional Accessories
1 Wall Mount
If the instrument cannot be placed on a table or on the ophthalmic unit, it can be
mounted on a wall with the optional wall mount.
2 Variable Focus Lens (for ACP-8
MC
/8
E
/8
EM
)
Variable focus lens is utilized when the ACP-8
MC
/8
E
/8
EM
can not be located
beside the patient.
Specifications
* Conditions during transport or storage temperature: -20~50°C humidity: 10~95%
Refracting distance 2.9 to 6.1m
Projection distance
Model ACP-8/8
E
/8
MC
/8
EM
Model ACP-8
R
2.9 to 6.1m
2.9 to 7.1m
Projection magnifications 30 × (at 5m refraction)
Projection size 330 × 270mm, φ300mm (at 5m refraction)
Numbers of charts 30
Chart change-over 1 frame / 0.03sec.
Numbers of masks Open 1, Horizontal line 5, Vertical line 8,
Single isolation 21, R and G 1
Mask change-over 1 frame / 0.03sec.
Program step Max. of 30 steps are available × 2 Type
Model version
Tilt range +/-10° Upward/downward tilt form horizontal line of pro-
jection
Projection lamp 12V 50W (Halogen lamp)
Automatic shut-off mechanism After 10 minutes
Electricity AC 120, 220, 230 or 240V, 50/60Hz
adjustable by voltage selector on the fuse holder
Power consumption 80VA
Dimensions 226 (W) × 300 (D) × 245 (H)
Weight 6.0kgs.
Masking Programming
Variable
Focus
Lens
RS232C Controlle
r
ACP-8
E
-*- *
ACP-8
MC
**-*
ACP-8
EM
**- *
ACP-8
R
*** *