27
Care and check
5 Replace the top cover after completing the DIP switch setting, tighten the three
screws on the lower cover (with the lamp cover removed) and then tighten the lamp
cover with attaching screw
ON
OFF
5
1 2 3 4 876
Channel Remote control
Body
56
1S1=HS2=HOFFOFF
2S1=LS2=HONOFF
3S1=HS2=LOFFON
4S1=LS2=LONON
DIP switch position on the main body Enlarged view of the DIP switch on the main body
Adjusting volume
Channel switch position on the remote controller
Plant switch
Remote control channel change-ove
Plant switch
•Switch 1
•Switch 2
•Switch 3
•Switch 4
•Switch 5
• Switch 6
•Switch 7
•Switch 8
To Next Page
Loading...
