15
How to save battery power:
• Backlight
The initial setting for backlight brightness when shipped from the factory is 3 (third from the
darkest setting). If the backlight is not needed, lower the brightness or set so that the light will
turn off after a short time. Brightness can be adjusted by the following procedure:
1 Tap the [Start][Setting][System] tab[Backlight] icon and [Brightness] tab.
2 Adjust by sliding the [Brightness on Battery Power] slider bar sideways.
• Wireless
Turn off Bluetooth, RS-1 and Wireless LAN when not in use.
• Low temperature use
Battery capacity is reduced at low temperatures. When using under low temperature
conditions, keep the equipment as warm as possible.
• CF cards, SD cards, USB port
Disconnect cards and cables when not in use.
To Next Page
Loading...
