20
RAM Data Backup
If your device had not recharged during several days, the battery will be running down, and you
would lose all of data on the device other than that in the "Flash ROM (internal Flash ROM)".
In addition, you might perform hardware-reset by the hardware problem or software problem. In this
case, you would lose all data same as the above.
You can use Backup function of FC-200 in order to evade such kind of uneasiness. Your data will be
restored to latest condition* automatically when rebooting by using the Backup function.
The Backup function saves all data files of RAM (except for OS files), registry file and additionally
installed programs into named "Backup" folder in the "Flash ROM".
Execute the Backup function
1 Tap the icon "Start"-"Settings"-"Control Panel"-"System"-"Backup". You can see the "RAM
Backup" screen on Display.
2 Tap the "Backup" button. Backup function will start. Return to "RAM Backup" screen
automatically, when the data back up has been completed.
3 Tap the button "OK" on title bar. After that "RAM backup" screen will close automatically.
* Restoring former backed up data may be incomplete if you upgrade OS version.
* The conditions that you executed the backup function last.
* Backing up data may be incomplete if remaining capacity of "Storage Card" is not enough.
Please make sure the remaining capacity of "Storage Card" before proceeding to the data
back up.
* Restoration will be impossible if you delete the "Backup" folder in the "Storage Card".
To Next Page
Loading...
