Topcon FC-200 - Set the Automatic Backup for Every Suspension; Set the Restoration Disabled after Hard Reset

21
Set the Automatic Backup for every suspension
1 On the "RAM Backup" Screen, please check it 'ON' "RAM data will be backed up before
suspension".(Factory setting is 'OFF' as default)
2 Tap the button "OK" on title bar. After that, "RAM backup" screen will close automatically.
Set the restoration disabled after hard reset
1 On the "RAM Backup" Screen, check it 'OFF' the "Data restoration after hard reset."
(Factory setting is 'ON' as default)
2 Tap the button "OK" on title bar. After that, "RAM backup" screen will close automatically.