Topcon GC-35 User Manual

GC-35 Setup
Loading and Saving Machine Configuration Files
18
P/N: 1001548-01
Loading and Saving Machine Configuration Files
From the GC-35 Performance Menu you can load and save machine configuration files from a USB drive and/or
select files from a list. You can save a maximum of twenty machine configuration files to the GC-35.
Loading Files
1. Insert a USB key with the machine configuration file into the GC-35’s USB port.
2. From the Performance Menu, select Machine Type, and press the Enter button .
3. Select Load from USB, and press Enter .
4. Choose the configuration file, and press .
5. To use the configuration file, select Use, and press .
Saving Files
1. From the Performance Menu, select Machine Type, and press the Enter button .
2. Select Enter Name/Save, and press Enter .
3. Use the adjustment knob to cycle through characters (letters A-Z and numbers from 0-9) to name the configuration
file, and press
.
4. To delete a character, use the knob to cycle through the characters until the  symbol appears. Press .
5. When you are finished naming the file, press .
GC-35_QRG.book Page 18 Tuesday, January 31, 2017 3:43 PM

Topcon GC-35 Specifications

General

Brand	Topcon
Model	GC-35
Category	Control Unit
Language	English