Topcon GC-35 - General Features; Adjusting Setpoint Value Before Operation; Adjusting Setpoint Value During Automatic Control

GC-35 Setup
General Features
14
P/N: 1001548-01
General Features
Adjusting the Setpoint
Value Before You Start
Adjusting the Setpoint
Value While in Automatic
Control
0.20
0.18
0.40
0.40
Turn On
AUTO
5
2
33
Turn Grade
Adjustment
Knob to
Desired Value
4
Press
and Hold
Menu/Set
Button
Press Survey
Turn O
AUTO
1
1
Turn Grade
Adjustment
Knob to
Desired Value
2
Press
and Hold
Menu/Set
Button
0.20
0.18
0.40
0.38
Adjusting the Setpoint value does
not change the existing depth, it
only changes the reference number
viewed on the display
The Setpoint value changes to Red
when you turn the knob.
GC-35_QRG.book Page 14 Tuesday, January 31, 2017 3:43 PM