Need help?Do you have a question about the Topcon ASC-10 and is the answer not in the manual?
General| Brand | Topcon |
|---|---|
| Model | ASC-10 |
| Category | Control Unit |
| Language | English |
Outlines application, copyright, trademarks, warranty, and liability clauses.
Covers safety regulations, type approval, radio interference, and communications compliance.
Details navigation between the console's setup and operation screens.
Guides on creating new implement profiles for different console types.
Defines implement measurements for accurate guidance and product application.
Configures the master switch for sprayer application control and coverage map.
Configures boom sections, width, shutoff, and nozzles for accurate application.
Sets response times for section activation/deactivation to prevent gaps or overlaps.
Configures virtual or external switches for controlling sprayer boom sections.
Details configuring nozzle names, types, rates, and reference pressure.
Configures tank names and capacities for the sprayer system.
Defines calibration factors, minimum flow, and valve settings for product flow.
Configures pressure sensor settings, including maximum pressure and voltage.
Selects between Pressure Only or Pressure Fallback control modes.
Configures regulator or proportional valve systems for flow control.
Enables Auto Section Control and Variable Rate Control features.
Customizes and displays sprayer information on the console dashboard.
Activates and configures auto section control for precise application.
Accesses the sprayer controller interface in mini-view or full screen.
Manages tank selection, product configuration, and filling operations.
Guides through calibration of wheel sensors, flow meters, and valve balancing.
Enables and configures area counters for tracking treated area and product usage.
Explains the function and status indicators of the sprayer system master switch.
Activates and configures auto section control for the X14 console.
Accesses the sprayer controller interface on the X14 console.
Manages tank setup, product selection, and application rate settings for X14.
Guides calibration of wheel sensors and flow meters for the X14 console.
Instructions for importing and using VRC prescription maps.
To Next Page
