Radio Configuration
P/N 7010-0626 www.topconpositioning.com
2-35
18. On the Connection Parameters screen, select a baud rate of
38400 and enable the Manual mode only check box
(Figure 2-34), then click Connect.
Figure 2-34. Connection Parameters – Manual Mode Only
19. On the Manual Mode screen, type the following
commands, pressing Enter (or clicking Send command)
after each command. When finished, you should have five
responses (Figure 2-35 on page 2-36).
QUIT
%%set,cur/term/imode,cmd
%%set,dev/ser/c/echo,/dev/null
%%set,dev/ser/c/imode,cmd
%%set,dev/ser/c/rate,38400
%%set,cur/term/rate,115200
To Next Page
