To Next PageTo Next Page
Need help?Do you have a question about the Topcon System 150 and is the answer not in the manual?
Terms related to product application, copyright, and general conditions.
Lists trademarks, website disclaimers, and critical safety warnings.
Warranty coverage for TPA manufactured components.
Procedures for returning defective items for warranty repair.
States the product is provided 'as is' with no other warranties.
Limits TPA's liability for damages and outlines indemnity clauses.
Details on amendment, governing laws, and product change rights.
Explains symbols used in the manual for warnings and tips.
Step-by-step guide to activate the Auto-Steering feature.
Procedure for entering the required access code for calibration.
Instructions on saving and reusing setup and calibration parameters.
Steps to load previously saved steering profiles.
Introduction to tuning parameters for optimal steering performance.
Setting the vehicle's maximum steering limits for the system.
Procedure to calibrate the system's compass for accurate direction.
Steps to calibrate the wheel angle sensor for steering input.
Calibrating the mounting bias for accurate sensor readings.
Verifying calibration for straight line approaches.
Verifying calibration for curved line approaches.
Configuring the type of steering controller used by the system.
Overview of the main display showing steering status.
General steps to operate the Auto-Steering system.
Discusses physical and speed-related constraints of the auto-steering system.
Explains the meaning of LED colors and patterns on the AGI-3 receiver.
General
