Topcon A3524 User Manual

Topcon Hiper-AG GPS Manual
Part Number A3524
Rev. 1.1
© Copyright Topcon Precision Agriculture
March, 2008
All contents in this manual are copyrighted by Topcon. All rights
reserved. The information contained herein may not be used, accessed,
copied, stored, displayed, sold, modied, published or distributed, or
otherwise reproduced without express written consent from Topcon.

Topcon A3524 Specifications

General

Type	GNSS receiver
Humidity	95% non-condensing
Signal Tracking	GPS, GLONASS
Reacquisition	1s
Interfaces	Ethernet
Communication Interface	Ethernet
Power Supply	DC input
Storage Temperature	-40°C to +70°C
Input Voltage	9V to 36V DC

Summary

Overview of Hiper-AG GPS Receiver

Layout of Hiper-AG Front Panel

Details the physical components and ports on the front of the Hiper-AG GPS receiver.

Functions

Installing Topcon Hiper-AG RTK Mobile Base Station

Connecting the Power/ Communication cables

Provides instructions on how to connect power and communication cables to the Hiper-AG unit.

Connect UHF Antenna

Positioning

Switching the Hiper-AG ON

Installing Topcon Hiper-AG RTK Fixed Base Station

Configuration

Topcon UHF Radio

PG-A1 RTK GPS Antenna with Ground Plane

Power Connection

Instructions for connecting the power supply, including safety precautions.

UHF Collinear Antenna

Lightning Arrestor

Details the installation and importance of the lightning arrestor for equipment protection.

Enhancing GPS and Radio Performance

Configuring Topcon Hiper-AG RTK Base Station (Fixed and Mobile)

Accessing Setup Program

Guides on how to launch the GPS setup program from the X20 console.

Setup Program

Single Base Station Setup

Step-by-step instructions for configuring a single base station using the setup program.

Add Position to List

Recalling Base Station Position from List

Multi-Base Station Setup

Provides instructions for configuring multiple base stations simultaneously.