Topcon A3524 - Installing Topcon Hiper-AG RTK Fixed Base Station

6-1
A3524 Rev 1.1
Installing Topcon Hiper-AG RTK Fixed Base Station
Installing Topcon Hiper-
AG RTK Fixed Base
Station
The Hiper-AG RTK xed Base Station differs from the Hiper-AG
mobile Base Station in that it incorporates a high-gain antenna (Figure
6-1) and the radio power can be increased to its maximum output.
Required Components
Hiper-AG GPS receiver•
Power cable•
Comms cable•
UHF Portable antenna•
•
Figure 6-1. Fixed Base Station
UHF
Antenna
GPS
Antenna