Topcon System 150 - Recalling a Steering Profile

1-6
www.topconpa.com
System 150 Auto Steer Setup Guide
Recalling a Steering Prole
A Steering Prole allows you to save your setup and calibration
parameters so that they may be reused. This section will explain how to
recall a previously created Steering Prole.
Figure 1-10. Auto Steer Setup screen
Figure 1-11. Select Steering Prole screen
Select to enter the 1. Select Steering Prole screen
1
2
3
Use to 2. up and down arrow buttons to select a prole
Select to conrm your selection. You will be returned to the 3.
Auto Steer Setup screen with your prole loaded