Topcon LN-100 - W-LAN Connection Settings

16
5. PREPARATION
 Connection setting items
• After purchasing the instrument, change the password for Mode A to other than the serial number.
• If you forget the password, refer to "8.2 What to Do When" on page 25.
Item Selection item Default factory setting
Mode A
SSID Fixed Model name _ serial number
(e.g. LN-100_AB1234)
Security None/WEP/WPA/WPA2 WPA2
Password
(Security key)
WEP64:
String of 5 characters
(e.g. RIVER) or
10 hexadecimal characters
(e.g. 12345678AF)
WEP128:
String of 13 characters or
26 hexadecimal characters
WPA/WPA2:
String of 8 to 63 characters or
64 hexadecimal characters
00serial number
(e.g. 00AB1234)
Channel 1 to 11 11
IP address Fixed 192.168.0.1
Subnet mask Fixed 255.255.255.0
DHCP function Fixed DHCP server enabled
DHCP lease address Fixed 192.168.0.10 to
192.168.0.25
Mode B
SSID Up to 32 bytes No setting
Security None/WEP/WPA/WPA2 None
Password
(Security key)
WEP64:
String of 5 characters or
10 hexadecimal characters
WEP128:
String of 13 characters or
26 hexadecimal characters
WPA/WPA2:
String of 8 to 63 characters or
64 hexadecimal characters
No setting
IP address xxx.xxx.xxx.xxx format No setting
Subnet mask xxx.xxx.xxx.xxx format No setting
DHCP function DHCP client / static IP DHCP client