EasyManua.ls Logo

Topcon LN-100 - Angle and Distance Measurement Specs

Topcon LN-100
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
9. SPECIFICATIONS
e (water vapor pressure) can be calculated using the following formula.
Laser pointer section (Availability of the function depends on the application to be used.)
Light source Laser diode
Wavelength 690 nm
Laser class Class 3R
Spot size Width: 7 mm / Length: 8 mm (at a distance of 20 m)
Width 16.9 mm / Length: 19.3 mm (at a distance of 50 m)
Auto tracking section
Method Image sensor method using a coaxial optical system for beam
emission and reception
Auto trackable range
0.9 to 100 m
*1
Light source Laser diode
Wavelength 793 nm
Laser class Class 1
*1: When using ATP2/ATP2S
Weather conditions for measurement: Other than bad weather, such as rain, dense fog, and
strong heat haze
Ranging tracking optical system
Structure Coaxial optical system for tracking a measurement of distance
Objective aperture Ø16.5 mm
Focus distance 50 mm
Motor actuator
Motion range 360° (Horizontal)
Maximum rotation speed 60°/second (10 rpm)
(The time required for 180° rotation: 3.0 seconds)
Minimum feed angle (operated from the external application)
15" (±3.75 mm equivalent at a distance of 50 m)
Auto leveling section
Method Main unit integral type
Auto leveling mechanism Dual-axis
Leveling range ±3°
Guide light
Light source Light-emitting diode (LED) (Red 626 nm / Green 524 nm)
Visible range Greater than 8° at horizontal (full length: 7 m at a distance of 50
m)
E6.1110
7.5 t×()
t237.3+()
----------------------------
×=
eh
E
100
--------- -×=

Related product manuals