What to do if xenon lamp does not turn on in Topcon TRC-50DX Camcorder?
- DdaviddavisAug 23, 2025
If the xenon lamp on your Topcon Camcorder isn't turning on, there are several potential causes. The power save function might be activated; if "SLEEP" is displayed on the control panel, press the photography switch to deactivate it. The xenon lamp itself may have reached the end of its life and needs replacing. A fuse could be burnt, requiring replacement. The xenon lamp set screw might be loose, so refasten it securely. Finally, check if the NF switch on the base unit is pressed; if so, press the Flash selector switch to adjust the flash level.

