26
PREPARATIONS
Setting of auto shoot
Set the auto shoot function ON/OFF. (When shipped, "ON" is set.)
The auto shoot mechanism works as follows: when the fitted alignment bright spot is put into
( ) in the focalized status, the instrument takes a picture automatically without pressing the
photography switch.
1 On the "MENU" screen, make sure that "AUTO" is selected and press the .
2 Press the or to select "SHOOT"
and then press the .
3 Select "ON" or "OFF" with the or
and then press the . The selected data is set.
ENTER SWITCH
DOWNWARD CURSOR SWITCH UPWARD CURSOR SWITCH
ENTER SWITCH
MENU
ON
FIXATION
FLASH
SMALL PUPIL
OFF
FOCUS
SHOOT
MEMORY
DOWNWARD CURSOR SWITCH UPWARD CURSOR SWITCH
ENTER SWITCH
MENU
ON
FIXATION
FLASH
SMALL PUPIL
OFF
FOCUS
SHOOT
MEMORY
To Next Page
Loading...