34
PREPARATIONS
Setting of the recording medium to save image (MEMORY)
RESET FROM POWER SAVE STATE
This machine adopts the power save method for power saving.
When the instrument body is not operated within a set time, the power save function stops
power supply to the monitor, CCD camera, illumination light source and photography light
source.
When power save sets in, the power lamp on the control panel flickers and the monitor screen
goes off.
1 Press the .
The color LCD monitor is displayed and ready for photography.
When shipped, the power save set time is 10 minutes.
To change the set time, contact your dealer or TOPCON (see the back cover).
Item Contents Initial setting Explanation
SD CARD ON
OFF
OFF Select "ON" to save the photographed image
in SD CARD. Select "OFF" not to save the
photographed image in it.
USB MEMORY REMOVE ----- Select "REMOVE" to remove the USB mem-
ory from the instrument.
PHOTOGRAPHY SWITCH
To Next Page
Loading...