33
PREPARATIONS
Menu functions list
You can also change the set data for other items in the same way as setting of the auto func-
tions. The settable menus are shown below.
Setting of the AUTO functions (AUTO)
Setting of the flash level (FLASH)
Setting of the internal fixation target (FIXATION)
* When "DEFAULT" is set, "Center", "Center of optic disc" or "Center of macula" is lit in the DCF
mode. For details, refer to page 48. When "CUSTOM" is set, the optional point is lit in the DCF
mode. But, when shipped, the instrument is set so that the same point as "DEFAULT" may be
lit. When you want to change the lighting point for "CUSTOM", contact your dealer or TOPCON
office (see the back cover).
Item Contents Initial setting Explanation
FOCUS ON/OFF ON Select ON/OFF of auto focus.
SHOOT ON/OFF ON Select ON/OFF of auto shoot.
SMALL PUPIL ON/OFF ON Select ON/OFF of auto small pupil.
Item Contents Initial setting Explanation
COLOR BASE LVL -4 to +4 0 Set the reference value of flash level (in color
photography).
When you set "0", the reference value of flash
level is 9.4W·s.
GREEN BASE LVL -4 to +4 0 Set the reference value of flash level (in red-
free photography).
When you set "0", the reference value of flash
level is 27W·s.
Item Contents Initial setting Explanation
INT/EXT INTERNAL
EXTERNAL
INTERNAL Select the internal or external fixation target.
TYPE PERIPHERAL
DCF
PERIPHERAL When using the internal fixation target, select
whether it should be used as the peripheral fix-
ation target or DCF.
* MODE DEFAULT
CUSTOM
DEFAULT To light up the LED when using DCF, select
"Default setting" or "Custom setting".
PERIPHERAL 4A/4B/5A/5B
/8POINT
/9POINT
8POINT Select the peripheral fixation target pattern.
4A (diagonal 4 positions)
4B (vertical-horizontal 4 positions)
5A (diagonal 4 positions + center)
5B (vertical-horizontal positions + center)
8POINT (8 positions)
9POINT (8 positions + center)
DCF P2/P3 P3 Select the DCF pattern.
P2 (C: center, D: center of optic disc)
P3 (C: center, D: center of optic disc,
F: center of macula)
To Next Page
Loading...