Topcon TRL-35 - Configure TRL-35 as PDL Transmitter

Configuring the TRL-35
P/N 7010-0815
2-3
Configuring the TRL-35
As a Transmitter in
Modem-TPS in PDL Protocol
The TRL-35 provides high powered TX communication from the
base station to the rover. To configure the UHF radio modems, have
the following ready:
• PC running Windows 98, 2000, NT, or XP
• Modem-TPS version 2.2p0 or later
• TRL-35 Programming Cable, Topcon P/N 14-008107-01LF
• TRL-35 Power Cable, Topcon P/N 14-008110-01
To configure the UHF radio modem perform the following steps:
1. Connect the computer and TRL-35 using the TRL-35
programming cable.
2. Connect the power cable to the TRL-35 and confirm the power
LED is on.
3. Open Modem-TPS and on the connection dialog box, then click
Cancel.
4. Go to Tool s Options.
5. On the Options screen, change the Connect modem field to
External, and change the Baud Rate field to 38400.
NOTE
To comply with RF exposure requirements,
maintain at least 25cm between the user and the
radio modem.
NOTE
Before connecting power to the TRL-35 confirm
the modem antenna is attached.