Toppro TPR-5000 - Accessing the FTP Server

To Next Page

To Previous Page

62 Accessing via Network

9.3 Accessing the FTP server

To Access to the FTP server, set the Installation > Network Set-

ting > FTP Server option to Enable.

Select the Installation > Network Setting > User Info menu.

At this time, you have to enter Personal Identiﬁcation Num-

ber (PIN). Then set the User ID and Password options as you

desire. And select OK to save the settings. When you access

to the FTP server, you will be asked for the account that was

made with these options.

NOTE

You can access the FTP server with an anonymous account.

However, with an anonymous account you can only down-

load ﬁles. You cannot upload ﬁles.

You need an FTP client program to access the FTP server of the

digital receiver.

You can log into the FTP server with the user name and pass-

word speciﬁed in the Installation > Network Setting > User

Info menu.