9
9.2 Network setup 61
Whenever a new dynamic IP address is assigned to the router,
it will inform the DDNS service provider of the new IP ad-
dress. This makes it possible that you access the router with a
domain name at any time.
9.2 Network setup
1. Connect your Ethernet cable from your router to the Top-
pro recorder.
2. Press Installation > Network Setting > IP Setting.
3. It is recommended to use a dynamic IP address by the
router therefore select DHCP as the connection type.
However if a static connection is set then please refer to
your router for an IP address, Subnet Mask, Gateway,
Primary DNS, Secondary DNS.
4. Once a connection has been set scroll down to activate
profile and press the OK button on the remote.
5. A successful connection will populate all the IP settings
and the Level/Quality bars on the TV screen will show
a high percentage level.
NOTE
After selecting activate please allow up to 5 seconds for fields
to populate. Most routers can be accessed via a web browser.
Refer to your Router user guide on how to access router set-
ting.
To Next Page
Loading...