Guangzhou Topshine Information Technic Co., LTD
Address: RM 605, #52 SHUI YIN RD, YUE XIU DIST, GUANGZHOU, CHINA
User manual of tracker MT01
-
13
-
Description: APN name, APN username, APN password
If no password required, just put in APN name only.
③ Set IP Address and Port by SMS
Description: IP address is 210.209.68.180 Port is 9500
SMS
command:
W<password>,01
2,<IP>,<po
rt>
Example:
SMS send: W000000,012, 210.209.68.180,9500
We support domain name instead of IP address:
Example: W000000,012,www.global-track.net,9500
④ Enable GPRS Function
Command
:
W<pa
ssword>,0
13,X
Description: X=0,close GPRS(Default)
X=1,enable TCP
X=2,enble UDP
⑤ Set Time Interval for Sending GPRS Packet
Command
:
W<pa
ssword>,0
14,XXXXX
Description: XXXXX should be in five digitals and in unit of 10 seconds.
XXXXX =00000, to disable this function
XXXXX =00001~65535, time interval for sending GPRS packet and in unit of 10 seconds
Please select experienced technicians to install this system.
The installation should be carried in the working condition for this system.
Install this system in a secret place.
Prevent this system from dust and humidity.
Connect the wires of the mainframe. The Relay can control oil pump wire or
electric wire (ACC). It suggested connecting it to oil pump wire.
Connect the wires of other wires, leave the plug unplugged.
Fixing, wiring connecting, binding should be carried on carefully.
Installation Diagram
To Next Page
Loading...
