Checks and repairs on hydraulic components
Moving the unit into the repair position for the lower structures
Slipping hazard from leaked oil.
Bruising and bone fractures possible.
Clean up any leaked oil with a cloth or suitable binding
agents.
Wear safety shoes with non-slip soles.
Health hazard from contact with hydraulic oil.
Wear nitrile gloves and chemical-resistant protective
goggles during work that may include contact with
hydraulic oil.
Proceed as follows to bring the unit into the repair position for the lower
structures:
Place the unit on a solid surface.
Remove the carrying handle, see from page 50.
Release the screw connections (A) with two combination wrenches WAF 10.
To Next Page
Loading...