EasyManua.ls Logo

Torc HYFLOW 230-2 - Replacing the Maximum Pressure Valve

Default Icon
93 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Checks and repairs on hydraulic components
67
Check whether oil is dripping from the maximum pressure valve (E).
If oil drips from the maximum pressure valve, it is defective.
If the maximum pressure valve is defective, replace it, see page 67.
Replacing the maximum pressure valve
WARNING
Slipping hazard from leaked oil.
Bruising and bone fractures possible.
Clean up any leaked oil with a cloth or suitable binding
agents.
Wear safety shoes with non-slip soles.
CAUTION
Health hazard from contact with hydraulic oil.
Wear nitrile gloves and chemical-resistant protective
goggles during work that may include contact with
hydraulic oil.

Table of Contents