Checks and repairs on hydraulic components
Checking and cleaning the screen filter
Slipping hazard from leaked oil.
Bruising and bone fractures possible.
Clean up any leaked oil with a cloth or suitable binding
agents.
Wear safety shoes with non-slip soles.
Health hazard from contact with hydraulic oil.
Wear nitrile gloves and chemical-resistant protective
goggles during work that may include contact with
hydraulic oil.
To check the screen filter, proceed as follows:
Move the unit into the repair position for the lower structures, see from
page 52.
Check the screen filter (A) for visible contamination.
To clean a blocked screen filter, proceed as follows:
Remove the contaminations with a soft cloth.
During cleaning, exert only light pressure on the screen filter to avoid
damaging it.
To Next Page
Loading...