Completing repair work
Mounting the unit on the oil tank
Slipping hazard from leaked oil.
Bruising and bone fractures possible.
Clean up any leaked oil with a cloth or suitable binding
agents.
Wear safety shoes with non-slip soles.
Health hazard from contact with hydraulic oil.
Wear nitrile gloves and chemical-resistant protective
goggles during work that may include contact with
hydraulic oil.
Proceed as follows to mount the unit back onto the oil tank:
Ensure that the oil tank rests on a stable surface.
Hold the unit by the couplings (B) and on the underside of the electric
control (C).
To Next Page
Loading...