Torex VDC Series - Unloading and Handling; VDC Lifting Points

8 2 - Operation and maintenance
TO320 M - EN - Ed. 04.09
UNLOADING AND HANDLING7.
On receiving the goods, check to make sure the type and quantity correspond to the data in the order
conrmation.
Damage, if any, must be immediately communicated in writing in the space provided for the purpose
in the waybill. The driver must accept the complaint and leave a copy with the user. If the supply
is delivered free to destination, send the complaint to the manufacturer, or directly to the haulage
contractors.
Claims for damages shall not be accepted unless made immediately on receipt of the goods.
Avoid all types of damage during unloading and handling operations. Bear in mind that it is mechani-
cal material which must be handled with care. Use the eyebolts xed to the existent holes for lifting
and handling purposes. Use lifting systems suitable for the weights, dimensions and movements to
be carried out.
VDC lifting points7.1
For lifting and handling the valve, use the holes present on the valve inlet spout ange for xing the
eyebolts.
Lifting points
Hook to the eyebolts by means of shackles and use hooks with safety catches.
DO NOT use clamps, rings, open hooks or systems that do not ensure the safety of the shackles or
hooks with safety catches.