Tork DW200B - User Manual

10
1
2
3
4
Holiday (H)
Date
Description
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
#
DW200B 3/21/07 11:44 AM Page 1

Summary

Installation Instructions

Grounding

Details on national electrical code requirements for grounding conductors, metallic conduits, and grounding terminals.

Instructions for Setting the Unit

To Set The Clock

Procedure to set the current hour and minutes, including AM/PM format selection.

To Modify Clock

Steps to adjust the clock settings after initial setup.

To Set Date

Instructions for setting the initial month, date, and year, with automatic day of the week calculation.

To Modify Date

Procedure to update the current date settings.

Daylight Saving Time

Guide to setting or modifying Daylight Saving Time, including automatic date acceptance.

Set Individual Holiday Dates

Instructions on how to program specific holiday dates for the time switch.

Schedule Set Mode

Setting Hours and Minutes

Procedure to set the ON and OFF times for a schedule event.

Setting Days and Holiday

Guide to selecting specific days of the week or holidays for a schedule.

Review, Modify and Delete Schedules

Clock Mode

Instructions for modifying existing clock settings.

Date Mode

Instructions for modifying existing date settings.

DST Daylight Saving Time

Instructions for modifying Daylight Saving Time settings.

Holiday Mode

Instructions for modifying or deleting programmed holiday dates.

Schedule Mode

Instructions for modifying schedule times, days, or deleting entries.

Run Mode

Description of the display status in run mode, including holiday indication.

Override

Event Key Function

Explanation of how the EVENT key updates load status and shows the last scheduled event.

Tork DW200B Specifications

General

Number of Channels	1
Enclosure	Plastic
Shortest ON/OFF Time	1 minute
Enclosure Rating	NEMA 1
Maximum Load	1800 W Resistive