7
5.3 ADDITIONAL HOLIDAY ENTRIES.
Repeat steps 5.1 and 5.2 for all holidays. Press MODE when
holidays are complete.
6.0 SCHEDULE SET MODE.
Press MODE until display shows:
EWZ201C in optional 1 channel or momentary mode or
EWZ101C allows only 1 channel for programming. For
EWZ201C in 2 channel mode, press CH1/CH2 to select
channel 1 or 2 for programming.
6.1 SETTING HOURS, MINUTES AND DAYS.
a. Press HOUR and MIN to set desired time.
b. Press EVENT to set desired event (ON or OFF).
c. Press DAY to change the selected day groups from all
days MO to SU.
A schedule with day group 12 (all days flashing) will be
executed on the Holiday block dates selected in section 5.
ON
SCH
To Next Page
Loading...
Need help?
General
