To Next PageTo Next Page
Need help?Do you have a question about the Tormax Automatic iMotion 2302 and is the answer not in the manual?
General| Brand | Tormax Automatic |
|---|---|
| Model | iMotion 2302 |
| Category | Door Opening System |
| Language | English |
Identifies the intended users of the automatic door system and their roles.
Guidelines for storing and transferring the instruction manual to new owners.
Lists the specific TORMAX automatic sliding door models covered by this manual.
Defines symbols used in the manual to convey warnings and important information.
Provides detailed technical specifications for the door drives and systems.
Outlines the responsibilities for instructing, operating, and maintaining the automatic door system.
Specifies the correct and intended applications and environments for the automatic sliding door system.
Details prohibited uses and modifications that could lead to damage or liability.
Lists requirements and conditions that must be met before operating the automatic door system.
Identifies potential dangers such as crushing, entanglement, and collision from moving parts.
Instructs users to perform regular checks and examinations as per manufacturer guidelines.
Provides instructions on safely taking the system out of service during a malfunction.
Outlines proper procedures for dismantling and disposing of the system at its end of service life.
Describes the main drive components including cladding, control system, and guide system.
Lists optional and standard accessories for the door drive system.
Details the components related to the moving and fixed parts of the door leaves.
Covers the various control elements for operating the automatic door system.
Explains the sensors and activation mechanisms on the drive side of the door.
Explains the sensors and activation mechanisms on the opposite side of the door.
Details the safety sensors used for protecting the door's movement area.
Describes emergency functions and systems integrated into the door operation.
Explains the system's output messages for status and alerts.
Describes how the door operates automatically using sensors for opening and closing.
Explains how to manage traffic flow, allowing movement in one direction or blocking access.
Details how the control system monitors safety sensors and conducts internal tests.
Explains the function and operation of the electro-mechanical lock for securing the door.
Covers how the system functions during a power failure, including emergency opening and battery operation.
Details the various operating modes (OFF, AUTOMATIC, EXIT, OPEN, Manual) for the door system.
Provides steps for initial setup and preparation before the automatic door system is put into operation.
Explains how to use the TORMAX user interface for selecting operating modes and unlocking.
Describes how to set operating modes using a simple physical switch.
Details manual locking/unlocking and operation with battery units or key switches during power outages.
Explains how to view and reset faults using the TORMAX user interface.
Describes how to perform a software reset using the operating mode switch.
Explains the procedure for resetting faults by disconnecting the power supply.
Provides instructions for cleaning the casing parts, user interface, and door leaves.
Details routine checks to be performed every three months to ensure system function and safety.
Outlines the requirements for professional maintenance and testing by trained specialists.
Lists common system behaviors, their causes, and recommended remedies or rectifications.
Provides a checklist for performing functional checks on various system components.
