Need help?Do you have a question about the Tormax Automatic 2101 and is the answer not in the manual?
Defines intended users and operators of the automatic sliding door system.
Instructions for storing, reordering, and transferring the user manual with the door system.
Specifies product names, door drive, and mentions the identification plate for the system.
Explains warning symbols and highlighted text for safe operation and system understanding.
Lists key technical specifications for the TORMAX 2101 Sliding Door Drive, including voltage and power.
Outlines roles for instructing, operating, and maintaining the automatic sliding door system.
Specifies intended use in dry premises and warns against improper operation or modifications.
Details prerequisites for operation, including skilled installation, operator instruction, and safety checks.
Identifies potential hazards like crushing, entanglement, and collision in the door leaf movement area.
Emphasizes regular checks and recommends maintenance contracts for system safety and value.
Provides instructions for safely taking the door system out of service during a fault.
Advises on proper dismantling and disposal of the system according to national regulations.
Presents a diagram and lists components of the automatic sliding door system for identification.
Explains automatic door operation with sensors, traffic control, system monitoring, and locks.
Details various operating modes like OFF, AUTO, AUTORED, and EXIT for different usage scenarios.
Guides on essential steps before switching on the mains power for the first-time system operation.
Explains how to select operating modes and interpret fault indications using the TORMAX interface.
Describes how to set the operating mode directly using a physical control switch.
Details manual locking/unlocking and door operation during power outages via battery or key switch.
Explains fault indication via LEDs and refers to the fault table for diagnosis and troubleshooting.
Covers software and power reset procedures to recover the system from various faults.
Addresses faults specific to the operating mode switch and their reset methods.
Provides instructions and safety warnings for cleaning the automatic sliding door system.
Details the operator's responsibility for checking function and safety devices regularly.
Specifies that maintenance and testing should be performed by trained specialists annually.
Lists fault codes, behavior, causes, and troubleshooting steps for system issues.
Provides a practical checklist for performing functional checks on system components.
General| Brand | Tormax Automatic |
|---|---|
| Model | 2101 |
| Category | Door Opening System |
| Language | English |
To Next Page