Tormax Automatic 2101 User Manual

Instructions for Use TORMAX 2101 T-1672 e 15
5.1 System with Operating Mode Switch
Faults are evident through unusual behaviour by the door or through a safety standstill. Thereafter the
door leaves can only be moved manually.
Restarting the Door System After a Fault with Standstill
• Change operating mode.
• Turn the key switch on and then off again quickly.
Restarting the Door System After Unusual Behaviour
• If the system does not have a battery unit, disconnect from the power supply for about 10 seconds.
• If the system does have a battery unit, disconnect from the power supply and wait for the emer-
gency opening.
A Software-Reset is beeing performed.
 MANUAL OPERATION is reset, the door opens and closes slowly.
If this does not reset the fault or if it re-occurs after a short time, you must arrange for the fault to be
rectified by a skilled person from your TORMAX dealer. See the last page or the service tag on the
system for the dealer’s address.

Tormax Automatic 2101 Specifications

General

Brand	Tormax Automatic
Model	2101
Category	Door Opening System
Language	English