EasyManua.ls Logo

Tornado H920

Tornado H920
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
V1.0
Question and Answer IconNeed help?

Do you have a question about the Tornado H920 and is the answer not in the manual?

Tornado H920 Specifications

General IconGeneral
ManufacturerYuneec
CategoryDrones
Weight (with battery and payload)4.5 kg
Flight Time25 minutes
GPSYes
Follow Me ModeYes
Return to HomeYes
Battery5400 mAh LiPo
Camera Resolution4K

Summary

SPECIFICATIONS

TORNADO H920 Aircraft Specifications

Technical specifications for the Tornado H920 aircraft.

ST12 ST24 Ground Station Specifications

Technical specifications for the ST12 and ST24 ground stations.

GENERAL SAFETY PRECAUTIONS AND WARNINGS

Aircraft Operation Safety Guidelines

Essential safety guidelines for operating the aircraft safely.

LIPO BATTERY WARNINGS AND USAGE GUIDELINES

Safe LiPo Battery Handling and Charging

Critical warnings and guidelines for safe LiPo battery use and charging.

CHARGING THE LIPO FLIGHT BATTERY

SYSTEM BATTERY CHARGING

FLIGHT CONTROLS

GIMBAL INSTALLATION AND ATTACHMENT

PREPARING TO FLY

Powering OnOff and Motor Control

Procedures for powering the system on/off and starting/stopping motors.

COMPASS CALIBRATION

Calibration Procedure and Precautions

Steps and precautions for performing compass calibration.

BINDING PROCEDURES

Binding in Single Mode (ST24)

Steps to bind the aircraft and gimbal to the ST24 in single operator mode.

Binding in Team Mode (ST12)

Steps to bind the aircraft to the ST12 in team operator mode.

Binding GB603 CGO4 Gimbals to ST24

Instructions for binding GB603/CGO4 gimbal cameras to the ST24.

CAMERA CONTROLS (SINGLE MODE)

CAMERA CONTROLS (TEAM MODE)

LITHIUM BATTERY WARNINGS AND USAGE GUIDELINES

Lithium Battery Safety and Handling

Warnings and guidelines for handling and using lithium batteries.

PROACTION SYSTEM SETUP

PROACTION SYSTEM OPERATION

Powering OnOff and Control Modes

Procedures for powering the ProAction system and selecting control modes.

CAMERA APPLICATION CONTROL