Overview of the InfoCenter Display (continued)
InfoCenter Display Icons
Service is due. Engine-coolant
temperature (°C or °F)
Engine rpm/status—
indicates the engine
speed (rpm)
The PTO is engaged.
Hour meter Start the engine.
Fuel level Engine
Fuel is low. PIN passcode
The glow plugs are
active.
A parked or recovery
regeneration is
requested.
Perform the regeneration
immediately.
The cutting units are up
or raising.
A regeneration is
acknowledged and the
request is processing.
The cutting units are
down or lowering.
A regeneration is in
progress and the exhaust
temperature is elevated.
Sit in the seat. NOx control system
malfunction; the machine
requires service.
The parking brake is on. Battery voltage
Warm-up mode Traction or Traction pedal
Fault/warning Increase value
Locked Decrease value
The cruise control is
engaged.
Scroll up/down
Operation: Before Operation Page 5–6 3464-482 A
To Next Page
Loading...
